Pressure washer vs. power washer – what’s the difference? A lot of articles tend to use these words interchangeably. Both machines are designed to clean surfaces, but they use different mechanisms to achieve this goal. We will explore the difference between these two types of machines and discuss which one is best for certain cleaning jobs.

Two electric pressure washers, a Titan and a Karcher, set up side by side with their accessories

What’s the Difference?

The main difference between pressure washers and power washers is the heating element. Pressure washers use a pressurized stream of water to clean surfaces, while power washers use a combination of pressurized water and heat. The heat helps loosen dirt and grime, making it easier for the power washer to remove. Power washers are typically used for tougher cleaning jobs, while pressure washers can be used for a variety of different tasks.

Pressure Washing

Pressure washers use a high-pressure water pump to create a powerful stream of water. This cleaning method uses a stream of water to clean surfaces by removing dirt, grime, and other debris. Pressure washers are best for cleaning jobs that do not require the use of heat.

Some examples of pressure washing tasks include:

  • Cleaning driveways
  • Washing cars
  • Cleaning decks and patios
  • Cleaning house siding
  • Removing dirt and dust

Tips

How much pressure you need will vary depending on the job. For example, pressure washers designed for home use typically have pressures between 1000 and 3000 PSI (pounds per square inch). Knowing which PSI you need will ensure you have the best pressure washer for the job at hand.

Power Washing

Power washers use a combination of pressure and heat to clean surfaces. The high pressure of the water stream helps to loosen dirt and grime, while the heated water makes it easier for the power washer to remove.

Power washers are typically used for an effective deep clean on tougher cleaning jobs, such as:

  • Cleaning grease stains and oil stains
  • Removing loose paint
  • Cleaning concrete
  • Cleaning tough dirt stains
  • Removing mold, mildew, and weeds
  • Removing salt

Tips

You’ll want to use a power washer on hard surfaces only because the hot water stream can damage softer surfaces like wood.

The benefits of using very hot water when deep cleaning are numerous. The high heat not only cleans better than unheated water, but in many cases it sanitizes as well.

Since most pressure washers use cold water, they will not make a huge difference when trying to clean grease. Grease stains require a higher water temperature provided by the heating elements in a power washer.

Soft Washing: The Third Option Most People Miss

Pressure washing and power washing are not the only two choices, and for some surfaces neither of them is the right answer. Soft washing does the work with cleaning solution instead of force, running at roughly 40 to 800 PSI where pressure washing starts at 1,000 PSI and climbs from there.

That matters because the surfaces people damage most often are the ones they should never have put a high-pressure wand near:

  • Vinyl and painted house siding
  • Asphalt roof shingles
  • Stucco and older masonry
  • Anything with plants growing underneath it

The other advantage is that it keeps working after you pack up. Soft washing kills the mold, mildew and algae rather than just blasting the surface layer off, so paint and masonry stay clean for longer. It also avoids forcing water behind siding, which is how a cleaning job turns into a repair job.

What you put in the tank does the cleaning here, so the detergent you choose matters more than the machine. Our guide to washing vinyl siding covers the approach in detail.

Gas or Electric, and How Much Pressure You Actually Need

Once you have settled on the method, the machine itself splits the same way every time. Electric units cost less, weigh less and run quieter, and they give up pressure to do it. Gas units are bigger, heavier and far louder, and they are where the numbers above 3,000 PSI live.

For ordinary work around a house, something in the 1,000 to 3,000 PSI range covers it. Contractors working on heavy machinery and large concrete areas tend to want closer to 3,500 PSI paired with a high flow rate, because flow is what carries the dirt away once the pressure has lifted it. There is more on the trade-off in our gas versus electric comparison.

There is also a newer category worth knowing about: cordless high-pressure cleaning guns. They draw water out of a bucket or a tank rather than needing a hose connection, and most ship with foam bottles and filters. They are nowhere near a real machine on power, but for a car, a bike or a set of muddy boots away from the house they do the job.

Which One Should You Use: Power Washer or Pressure Washer?

Now that you know the difference between power washing vs. pressure washing, you can decide which one is best for your cleaning needs. A power washer is the best option if you need to remove tough stains or paint. For general cleaning jobs, a pressure washer will suffice.

You should remember that many articles will use the terms power washing and pressure washing interchangeably. It should also be noted that power washers are commonly referred to as hot water pressure washers.

No matter which type of machine you choose, be sure to follow the manufacturer’s instructions to ensure safe and effective use. Wear gloves and safety glasses to protect yourself from the high-pressure stream of water. And always point the wand away from your body and other people to avoid injury.