If you are searching for pressure washing services in Arizona, you are usually trying to answer three things: what the job should cost, who to call, and whether it is worth hiring out at all. This page covers all three.
What pressure washing companies in Arizona actually do
Most residential outfits here offer some combination of the following. Knowing the names helps you ask for the right thing and compare quotes properly.
- House washing (soft wash). Low pressure plus a cleaning solution on stucco, painted block and siding. This is the correct method for almost every Arizona exterior wall.
- Driveway, walkway and patio concrete. High pressure with a surface cleaner attachment, which is what gives an even finish instead of stripe marks.
- Pool deck and surround cleaning. Usually includes treating the mineral staining that hard water leaves behind.
- Roof cleaning (soft wash only). Tile and shingle roofs must never be pressure washed. If a company offers to pressure wash your roof, cross them off.
- Block and perimeter wall cleaning. Common in desert subdivisions where walls collect dust and irrigation overspray.
- Solar panel cleaning. Dust buildup here directly reduces output, so this is offered far more in Arizona than in most states.
- Commercial and fleet work. Parking structures, drive-throughs, dumpster pads, trucks. Usually priced per visit on a schedule.
Companies serving Arizona’s largest cities
The five biggest population centres in Arizona are Phoenix, Tucson, Mesa, Chandler and Scottsdale. The companies below publish service areas covering them. Details come from each company’s own website and listings, checked in November 2026. We have not hired or tested these companies, so treat this as a starting point for your shortlist rather than an endorsement, and confirm details when you call.
Squeegee Squad – Phoenix
- Phone: (480) 288-0053
- Mailing address: PO Box 7475, Tempe, AZ 85281 (no public storefront listed)
- Areas served: Phoenix, Mesa, Gilbert, Scottsdale, Tempe, Sun Lakes, Fountain Hills, Chandler, Paradise Valley
- Offers: pressure washing and soft washing for residential and commercial property, plus window and solar panel cleaning
- Why it is on the list: its published service area covers four of the five cities on this page, and it separates soft washing from pressure washing rather than treating them as the same job
FISH Window Cleaning – Tucson
- Phone: (520) 798-3474
- Address: 850 E Ohio St. Ste. 21, Tucson, AZ 85714
- Areas served: Tucson, Green Valley, Sahuarita, Catalina Foothills, Rita Ranch and surrounding communities
- Offers: residential pressure washing for driveways, patios and sidewalks, plus commercial work for storefronts, offices and restaurants
- Why it is on the list: the only Tucson operator in our search that publishes a full street address and a local phone number rather than a lead-generation form
AZ Pressure Power Pros – greater Phoenix
- Phone: (480) 553-9688 (a second number, (480) 818-9660, appears on their estimate form, so confirm which to use)
- Address: not published
- Areas served: Phoenix, Scottsdale, Mesa, Chandler, Gilbert, Tempe, Glendale, Peoria, Queen Creek and much of the wider valley
- Offers: driveway and sidewalk cleaning, paver cleaning and sealing, house soft washing, pool area cleaning, gutter cleaning, and commercial work including parking garages and restaurant patios
- Why it is on the list: the broadest published service area of the three, and it lists paver sealing, which most of the others do not
How to check any of them yourself
Before you book, spend five minutes on this:
- Look the company up with the Arizona Registrar of Contractors to see current licence standing.
- Ask for a certificate of insurance showing general liability, and workers compensation if a crew is coming.
- Read the one and two star reviews, not the five star ones. That is where the real pattern is.
- Confirm the phone number on the company’s own site matches whatever directory you found them on. Mismatched numbers across listings are common and worth a question.
- Get the quote in writing before anyone starts.
How quotes are structured
Arizona contractors price in one of three ways, and knowing which you are being offered is the only way to compare two quotes fairly.
- Per square foot. Standard for flat concrete. Ask whether the figure covers pre-treatment and post-rinse or just the pass with the machine.
- Flat rate per job. Common for house washing, quoted after someone has seen the property or at least recent photos of it.
- Hourly. Usually for mixed or unpredictable work. Fine, as long as there is a written cap.
A quote worth accepting states: the surfaces included, the method for each, whether cleaning solution is used, who supplies water and power, how long the crew expects to be on site, and what happens if the result falls short. Anything vaguer than that is a number, not a quote.
What makes Arizona different
The conditions here change what the job involves, and a contractor who does not mention any of this probably works somewhere else most of the time.
- Stucco is everywhere and it is fragile. Too much pressure blows out the finish coat and the repair costs more than the wash did. Anyone reaching for a turbo nozzle on stucco is the wrong hire.
- Hard water staining needs chemistry, not force. Mineral deposits on block, pavers and glass come off with the right solution and dwell time. Blasting them only etches the surface.
- Heat changes the method. Detergent that dries on a wall before it is rinsed leaves streaks. In summer, good crews work shaded elevations, in smaller sections, and rinse faster.
- Water use is a fair question. A machine running at 4 GPM for three hours puts through a lot of water. Ask, and ask whether they bring their own tank.
- Timing around monsoon season. Washing right before storm season often means doing it twice. Many homeowners book once the worst of the storms have passed.
Five questions before you hire
- Are you licensed and insured, and can I see both? Ask for the certificate rather than a verbal yes. Contractor licensing in Arizona runs through the Registrar of Contractors, so you can check standing yourself. Insurance should include general liability, and workers compensation if a crew is coming.
- What pressure and nozzle will you use on my surfaces? An answer that changes by surface is a good sign. “We blast everything” is not.
- Soft wash or pressure wash for the walls and roof? For stucco, paint and roofing the answer should always be soft washing.
- Where does the runoff go? Detergent and dirt heading into a storm drain is the contractor’s responsibility, but you want someone who has thought about it.
- What is excluded? Window cleaning, gutter interiors, sealing afterwards and moving furniture are the usual extras. Settle it in writing first.
Before the crew arrives
Ten minutes of preparation prevents most of the problems people complain about afterwards.
- Move vehicles, planters and patio furniture clear of the work area.
- Close windows and any exterior doors fully, and point out ones that leak.
- Cover or move outdoor electronics, and show the crew where exterior outlets are.
- Flag anything delicate: light fixtures, old window seals, soft mortar, loose stucco patches.
- Agree where they will draw water from, and whether a hose bib has enough flow.
Checking the work afterwards
Walk the property with the crew before they pack up, while fixing anything is still easy.
- Look along surfaces at a low angle, not straight on. Stripe marks and missed passes only show from an angle.
- Check wall bases and corners, where dirt is most often left behind.
- Look for lap marks on concrete, which means the surface cleaner was moved too fast.
- Inspect stucco for any blown finish coat, and window frames for forced water.
- Confirm plants that were sprayed got rinsed down.
When it is worth doing yourself
Plenty of Arizona jobs are well within reach of a homeowner machine, and the machine often costs less than two or three visits from a contractor.
Reasonable to DIY: driveways and walkways, patio and pool decking, block walls at ground level, vehicles, patio furniture, grills and bins.
Worth hiring out: anything above single-storey height, roofs, large commercial areas, and any surface you are not confident about.
If you are leaning towards doing it yourself, start with our pressure washer buying guide, then read how to choose the right nozzle, which is the single thing that prevents most surface damage. For the most common job here, follow our guide to pressure washing a concrete or brick driveway.
Shortlisting a contractor
Get three quotes, in writing, from companies that have physically seen the property or recent photos of it. Our guide on finding a pressure washing company worth hiring covers how to shortlist, what a fair quote looks like, and the warning signs worth walking away from.
